Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Fluke 73: (1 year) CAL VER /5700
DATE:                  16-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 2.3 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       18
NUMBER OF LINES:       91
CONFIGURATION:         Fluke 5700A
=============================================================================
#
# Source:
#   Fluke 70 Series service manual (PN 731034).
#
# Compatibility:
#   MET/CAL 4.0 or later
#
# Subprocedures:
#   None
#
# Required Files:
#   73_DSP.bmp
#   57_73.bmp
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5700A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
# The 90 day specifications of the 5700A are used in TUR computations.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R                    P                            F        W
  1.002  ASK+           K
  1.003  MMFC                                                              C2
  1.004  HEAD         EQUIPMENT SETUP
  1.005  DISP         [32]                   WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration. DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  HEAD         {DISPLAY TEST}
  1.007  PICE         73_DSP
  2.001  DISP         Ambient temperature: 18C - 28C.
  2.001  DISP         Relative humidity: less than 80%.
  2.001  DISP         Allow the UUT to stabilize.
  2.002  HEAD         {RESISTANCE TESTS}
  2.003  PIC          57_73
  2.004  DISP         Select the Ohms function.
  2.005  HEAD         RESISTANCE TESTS: {320 Ohm Range}
  2.006  5700   320   100.0Z         1.2U                                  CW
  3.001  HEAD         RESISTANCE TESTS: {3200 Ohm Range}
  3.002  5700   3200  1000Z          11U                                   CW
  4.001  HEAD         RESISTANCE TESTS: {32 kOhm Range}
  4.002  5700   32    10.00kZ        0.11U                                 CW
  5.001  HEAD         RESISTANCE TESTS: {320 kOhm Range}
  5.002  5700   320   100.0kZ        1.1U                                  2W
  6.001  HEAD         RESISTANCE TESTS: {3.2 MOhm Range}
  6.002  5700   3.2   1.000MZ        0.011U                                2W
  7.001  HEAD         RESISTANCE TESTS: {32 MOhm Range}
  7.002  5700   32    10.00MZ        0.31U                                 2W
  8.001  HEAD         {DC MILLIVOLT TEST}
  8.002  DISP         Select the 300mV DC Function.
  8.003  HEAD         DC MILLIVOLT TEST: {320mV Range}
  8.004  5700   320   300.0mV        2.2U                                  2W
  9.001  HEAD         {DC VOLTAGE TEST}
  9.002  DISP         Select the V DC Function.
  9.003  HEAD         DC VOLTAGE TEST: {3.2V Range}
  9.004  5700   3.2   2.700V         0.02U                                 2W
 10.001  HEAD         DC VOLTAGE TEST: {32V Range}
 10.002  5700   32    27.00V         0.2U                                  2W
 11.001  HEAD         DC VOLTAGE TEST: {320V Range}
 11.002  5700   320   270.0V         2.0U                                  2W
 12.001  HEAD         DC VOLTAGE TEST: {1000V Range}
 12.002  5700   1000  1000V          9U                                    2W
 13.001  HEAD         {AC VOLTAGE TESTS}
 13.002  DISP         Select the V AC Function.
 13.003  HEAD         AC VOLTAGE TEST: {3.2V Range}
 13.004  5700   3.2   2.700V         0.083U        100H                    2W
 14.001  5700   3.2   2.700V         0.083U        500H                    2W
 15.001  HEAD         AC VOLTAGE TEST: {750V Range}
 15.002  5700   750   750V           25U           100H                    2W
 16.001  5700   750   750V           25U           1000H                   2W
 17.001  HEAD         {DC CURRENT TESTS}
 17.002  DISP         Select the A DC Function.
 17.003  HEAD         DC CURRENT TESTS: {10A Range}
# 10A Range done at 1.90A instead of 2.00A (1.99999A) to allow for slew.
 17.004  5700   10    1.90A          2% 0.02U                              2W
 18.001  END